928 Sofa Set – Assembly Guide

928 Sofa Set – Assembly Guide

The 928 Sofa Set is a premium multi-piece outdoor lounge set designed for spacious patios or garden environments. It includes a single chair, double seat, triple seat, coffee table, and side table—all packed across five cartons for secure delivery. Follow the detailed steps below to complete the setup.

Important Pre-Assembly Tips

• Always assemble on a flat, level surface such as carpet or flooring.

• Confirm all parts and hardware are included before beginning.

• Assemble loosely at first; tighten all bolts only once the structure is fully aligned.

• Glass panels should be installed with the spray-painted side facing downward.

• Avoid standing or jumping on the furniture.

• Keep sharp or hot objects away from cushions, wicker, and glass.

• Treat any corrosion with a suitable anti-rust solution.

• Store the furniture in a dry location during poor weather or long-term non-use.

• Keep small parts out of the reach of children.

Single Chair Assembly (×2)

Parts List:

• A: Right Side Panel ×2

• B: Left Side Panel ×2

• C-1: Back Panel ×2

• D-1: Seat Panel ×2

• E-1: Back Cushion ×2

• F-1: Seat Cushion ×2

Hardware:

• G: M6×40mm Bolt ×12

• H: M14mm Washer ×12

• I: M4 Allen Key ×1

Steps:

1. Connect side panels (A & B) to the back panel (C-1) using bolts and washers.

2. Insert the seat panel (D-1) between the sides and secure.

3. Repeat for the second single chair.

Double Seat Assembly

Parts List:

• A: Right Side Panel ×1

• B: Left Side Panel ×1

• C-2: Back Panel ×1

• D-2: Seat Panel ×1

• E-2: Back Cushions ×2

• F-2: Seat Cushions ×2

Hardware:

• G: M6×40mm Bolt ×13

• H: M14mm Washer ×13

• I: M4 Allen Key ×1

Steps:

1. Secure side panels (A & B) to back panel (C-2).

2. Attach seat panel (D-2) between the assembled frame.

Three Seat Assembly

Parts List:

• A: Right Side Panel ×1

• B: Left Side Panel ×1

• C-3: Back Panel ×1

• D-3: Seat Panel ×1

• E-3: Back Cushions ×3

• F-3: Seat Cushions ×3

Hardware:

• G: M6×40mm Bolt ×14

• H: M14mm Washer ×14

• I: M4 Allen Key ×1

Steps:

1. Connect side panels (A & B) to the back panel (C-3).

2. Attach the seat panel (D-3) between the sides.

Coffee Table Assembly

Parts List:

• A-4: Glass Panel ×1

• B-4: Foot Panel ×2

• C-4: Side Panel ×2

Hardware:

• G: M6×40mm Bolt ×8

• H: M14mm Washer ×8

• I: M4 Allen Key ×1

Steps:

1. Attach side panels (C-4) to one foot panel (B-4), then attach the second foot panel.

2. Insert the glass panel (A-4) into the tabletop grooves.

Side Table Assembly

Parts List:

• A-5: Glass Panel ×1

• B-5: Foot Panel ×2

• C-5: Side Panel ×2

Hardware:

• G: M6×40mm Bolt ×8

• H: M14mm Washer ×8

• I: M4 Allen Key ×1

Steps:

1. Connect both side panels (C-5) to one foot panel (B-5), then secure the other foot panel.

2. Place the glass panel (A-5) into the tabletop grooves.

3. Fully tighten all bolts once parts are properly aligned.

Support

If any parts are missing or damaged, contact the retailer where the set was purchased for resolution.

Download the PDF Version