903S Rattan Dining Table – Assembly Guide

903S Rattan Dining Table – Assembly Guide

The 903S Rattan Dining Table offers a sleek and modern outdoor dining solution. Packaged in two cartons, this table is designed for straightforward assembly with durable materials and a sturdy glass top. Follow this guide for safe and accurate setup.

Important Pre-Assembly Tips

• Assemble on a flat, level surface such as carpet.

• Verify that all parts and tools are included before beginning.

• Only fully tighten screws once the full frame is assembled.

• The spray-painted side of the glass must face downward.

• Do not jump on the furniture.

• Keep small components out of reach of children.

• Use anti-rust treatment if any corrosion is found.

• Avoid exposing cushions, wicker, or glass to heat or sharp objects.

• Store the table in a dry area during bad weather or long periods of disuse.

Rattan Dining Table Assembly Instructions

Parts List:

• A: Table Leg ×4

• B: Table Top ×1

• C: Glass Panel ×1

• D: Adjusting Screw (Feet) ×4

Hardware:

• F: M6×15mm Bolt ×12

• G: M14mm Washer ×12

• H: M4 Allen Key ×1

Step-by-Step Assembly:

Step 1:

Attach the four table legs (A) to the table top (B) using M6×15mm bolts (F) and washers (G).

Step 2:

Insert the adjusting feet (D) by hand into the bottom of each leg.

Step 3:

Place the glass panel (C) flat onto the tabletop, ensuring the painted side faces down.

Support

If any parts are missing or damaged, please contact the retailer you purchased the product from for assistance.

Download the PDF Version