901 Rattani Set – Assembly Guide

901 Rattani Set – Assembly Guide

The 901 Rattani Set is a stylish and durable furniture ensemble perfect for outdoor relaxation. This set includes two single chairs, one loveseat, and a coffee table, all designed for easy assembly and long-lasting use. Below is a step-by-step guide to help you assemble each component.

Important Pre-Assembly Tips

• Assemble on a level, even surface (e.g., carpet).

• Ensure all parts are present before starting.

• Only fully tighten screws once the entire frame is assembled.

• Place the painted side of the glass panel facing down.

• Keep small parts away from children.

• Avoid placing cushions near sharp objects or heat sources.

• Apply anti-rust treatments if corrosion appears.

• Store in a dry location during poor weather or long periods of non-use.

Single Chair Assembly Instructions

Parts List:

• A-1: Back Panel ×2

• B-1: Seat Panel ×2

• C: Right Side Panel ×2

• D: Left Side Panel ×2

• E: Seat Cushion ×2

Hardware:

• F: M6×35mm Bolt ×24

• G: M14mm Washer ×24

• H: M4 Allen Key ×1

Steps:

1. Attach the seat panel (B-1) to the back panel (A-1) using bolts (F) and washers (G).

2. Connect the side panels (C and D) to the seat and back assembly using bolts (F) and washers (G).

3. Repeat the above for the second single chair.

Loveseat Assembly Instructions

Parts List:

• A-2: Back Panel ×1

• B-2: Seat Panel ×1

• C: Right Side Panel ×1

• D: Left Side Panel ×1

• E: Seat Cushion ×1

Hardware:

• F: M6×35mm Bolt ×13

• G: M14mm Washer ×13

• H: M4 Allen Key ×1

Steps:

1. Attach the seat panel (B-2) to the back panel (A-2) using bolts (F) and washers (G).

2. Connect the side panels (C and D) to the assembled seat and back using bolts (F) and washers (G).

Coffee Table Assembly Instructions

Parts List:

• J: Foot Panel ×2

• K: Side Panel ×1

• L: Glass Panel ×1

Hardware:

• F: M6×35mm Bolt ×8

• G: M14mm Washer ×8

Steps:

1. Connect both side panels (K) to one foot panel (J) using bolts (F) and washers (G).

2. Attach the second foot panel (J) to the opposite side.

3. Place the glass panel (L) flat on top with the spray-painted side facing down.

4. Once aligned, fully tighten all bolts.

Support

If any parts are missing or damaged, please contact your retailer directly for assistance.

Download the PDF Version