932 Corner Dining Set – Assembly Guide

932 Corner Dining Set – Assembly Guide

The 932 Corner Dining Set is a modern and functional outdoor seating solution, ideal for alfresco meals and garden lounging. It includes two 3-seater sofas, a dining table with a glass top, and three footstools. The entire set is packed across three cartons for secure delivery.

Important Pre-Assembly Tips

• Assemble on a flat, level surface such as a carpet or flooring.

• Ensure all parts and hardware are present before beginning.

• Loosely fasten all bolts during assembly; tighten only when the frame is complete.

• Place the spray-painted side of the glass downward.

• Do not jump on the furniture.

• Keep heat sources and sharp objects away from cushions, glass, and wicker.

• Use an anti-rust solution if any corrosion appears.

• Store the set in a dry area during prolonged non-use or bad weather.

• Keep small parts out of the reach of children.

3-Seater Sofa Assembly (Left & Right Units)

Parts List (each unit):

• A-1 / A-2: Back Panel ×1

• B: Seat Panel ×1

• C / D: Side Panels ×1 each

• E: L Leg ×1

• F: Back Cushions ×3

• G: Seat Cushions ×3

• K (Right unit only): Sideboard ×1

Hardware:

• H: M6×40mm Bolt ×14 (per sofa)

• I: M14mm Washer ×14

• J: M4 Allen Key ×1

Steps for Each Sofa:

1. Attach seat panel (B) to the back panel (A-1 or A-2) using bolts and washers.

2. Connect both side panels (C & D).

3. On the right-side sofa, install the sideboard (K) and secure L leg (E) to the frame.

Dining Table Assembly

Parts List:

• L: Table Top ×1

• M: Foot Panel ×2

• P: Support Bar ×1

• O: Glass Panel ×1

Hardware:

• Q: M6×15mm Bolt ×4

• H: M6×40mm Bolt ×4

• I: M14mm Washer ×12

Steps:

1. Attach both foot panels (M) to the table top (L).

2. Connect the support bar (P) between the foot panels.

3. Place the glass panel (O) on top with the painted side down.

Footstool Assembly (×3)

Parts List:

• N: Stool Top ×3

• R: Foot Panel ×6

• T: Side Panel ×6

• G: Seat Cushion ×3

Hardware:

• H: M6×40mm Bolt ×36

• I: M14mm Washer ×36

Steps:

1. Connect two side panels (T) to one foot panel (R).

2. Attach a second foot panel (R) to form the base.

3. Attach the stool top (N) to the frame.

4. Repeat for the remaining two footstools.

Support

If any parts are missing or damaged, contact your retailer directly for assistance.

Download the PDF Version