924 Corner Sofa Set – Assembly Guide

924 Corner Sofa Set – Assembly Guide

The 924 Corner Sofa Set is a stylish and functional multi-piece outdoor seating solution, ideal for larger patios or garden lounges. This set includes arm sofas, armless sofas, a coffee table, and a footstool. Follow the steps below to ensure correct assembly.

Important Pre-Assembly Tips

• Assemble on a level surface, such as carpet or flooring.

• Check all parts and hardware are present before starting.

• Spray-painted side of glass should face downward.

• Tighten all bolts only after full assembly is completed.

• Do not jump on furniture or misuse it.

• Keep away from sharp objects and heat sources.

• Treat corrosion promptly using a suitable anti-rust product.

• Store in a dry location during bad weather or long periods of non-use.

• Keep small components out of children’s reach.

Arm Sofa Assembly

Parts List:

• A-1: Back Panel ×1

• A-2: Back Panel (Left Arm) ×1

• B-1: Seat Panel ×1

• B-2: Seat Panel (Left Arm) ×1

• C: Right Side Panel ×1

• D: Left Side Panel (Left Arm Sofa) ×1

• E: Legs ×4 (Pre-attached)

• F: Back Cushion ×2

• G: Seat Cushion ×2

Hardware:

• H: M6×40mm Bolt ×16

• I: M14mm Washer ×16

• J: M4 Allen Key ×1

Steps:

1. Attach seat panel (B-1) to back panel (A-1) using bolts (H) and washers (I).

2. Connect right side panel (C) to the above using bolts and washers.

3. Repeat the process with parts A-2, B-2, and D to form the Left Arm Sofa.

Armless Sofa Assembly

Parts List:

• A-3: Back Panel ×1

• B-3: Seat Panel ×1

• E: Legs ×4 (Pre-attached)

• F: Back Cushion ×1

• G: Seat Cushion ×1

Hardware:

• H: M6×40mm Bolt ×4

• I: M14mm Washer ×4

• J: M4 Allen Key ×1

Steps:

1. Connect seat panel (B-3) to back panel (A-3) using bolts (H) and washers (I).

Coffee Table Assembly

Parts List:

• L: Table Top ×1

• M: Long Side Panel ×2

• N: Short Side Panel ×2

• O: Glass Panel ×1

• E: Legs ×4

Hardware:

• H: M6×40mm Bolt ×20

• I: M14mm Washer ×20

Steps:

1. Assemble short side panels (N) to one long panel (M) using bolts and washers.

2. Connect the other long panel (M) to form a rectangle.

3. Attach legs (E) to the bottom of the frame.

4. Fix the table top (L) using bolts and washers.

5. Place the glass panel (O) on top with the painted side down.

Footstool Assembly

Parts List:

• K: Stool Top ×1

• P: Long Side Panel ×2

• Q: Short Side Panel ×2

• E: Legs ×4

• L: Seat Cushion ×1

Hardware:

• H: M6×40mm Bolt ×20

• I: M14mm Washer ×20

Steps:

1. Assemble short side panels (Q) to one long side (P).

2. Add the second long side (P) to complete the frame.

3. Fix the stool top (K) on top of the frame.

4. Attach the legs (E) using bolts and washers.

5. Once aligned, fully tighten all bolts and place the footstool cushion (L).

Support

If any parts are missing or damaged, please contact the retailer where you purchased the product.

Download the PDF Version