903L Rattan Dining Table – Assembly Guide

903L Rattan Dining Table – Assembly Guide

The 903L Rattan Dining Table is a durable and elegant piece, perfect for outdoor dining. Packed in two cartons, this table is designed for easy assembly with a sturdy structure and a stylish glass top. Follow the instructions below to assemble your table correctly and safely.

Important Pre-Assembly Tips

• Assemble the table on a flat, level surface such as a carpet.

• Confirm all parts and tools are present before starting.

• Attach all bolts loosely at first; only tighten them fully after the frame is complete.

• The spray-painted side of the glass must face downward.

• Do not jump or apply unnecessary pressure on the table.

• Store the table in a dry place during extended non-use or poor weather.

• Keep away from sharp objects and heat sources.

• Use anti-rust products on any corroded areas.

• Keep small parts out of reach of children.

Rattan Dining Table Assembly Instructions

Parts List:

• A: Table Leg ×2

• B: Long Pole ×2

• C: Support Bar ×2

• D: Glass Panel ×2

• E: Adjusting Screw (Feet) ×4

Hardware:

• F: M6×15mm Bolt ×16

• G: M14mm Washer ×16

• H: M4 Allen Key ×1

Step-by-Step Assembly:

Step 1:

Attach the two long poles (B) to one table leg (A) using M6×15mm bolts (F) and washers (G).
Then, insert the poles into the second table leg (A) and secure with the same type of bolts and washers.

Step 2:

Secure both support bars (C) between the two long poles using bolts (F) and washers (G).

Step 3:

Manually insert the adjusting feet (E) into the bottom of each leg.

Step 4:

Place the glass panels (D) flat on top of the table, ensuring the painted side faces downward.

Support

If any components are missing or damaged, please contact your retailer for resolution.

Download the PDF Version