938 Corner Sofa Set – Assembly Guide

938 Corner Sofa Set – Assembly Guide

The 938 Corner Sofa Set is a stylish, spacious outdoor seating arrangement perfect for modern patios. With modular sofas, a coffee table, and footstools, it offers both function and comfort. The set is shipped in three cartons and is designed for straightforward assembly.

Important Pre-Assembly Tips

• Assemble on a flat, level surface like carpet.

• Check that all parts and hardware are included before starting.

• Keep bolts loosely fastened until all components are in place, then fully tighten.

• The spray-painted side of the glass must face downward.

• Do not jump on the furniture.

• Keep heat sources and sharp objects away from cushions and glass.

• Apply an anti-rust product if signs of corrosion appear.

• Store the set indoors or in a dry place during bad weather or long periods of disuse.

• Keep small parts away from children.

3-Seater Sofa Assembly (×2)

Parts List:

• A-1 / A-2: Back Panel ×1

• B: Seat Panel ×1

• C: Right Side Panel ×1

• D: Left Side Panel ×1

• E: L Legs ×4 (Pre-installed)

• F: Back Cushions ×3

• G: Seat Cushions ×3

Hardware:

• H: M6×40mm Bolt ×14

• I: M14mm Washer ×14

• J: M4 Allen Key ×1

Steps:

1. Connect the seat panel (B) to the back panel (A-1 or A-2) using bolts and washers.

2. Attach the right and left side panels (C & D).

3. On the A-2 sofa, secure the side board (if included) using bolts (H) and washers (I).

Coffee Table Assembly

Parts List:

• L: Table Top ×1

• M: Side Panels ×2

• O: Glass Panel ×1

• E: L Legs ×4 (Pre-installed)

Hardware:

• H: M6×40mm Bolt ×8

• I: M14mm Washer ×8

Steps:

1. Attach the side panels (M) to the table top (L) using bolts and washers.

2. Place the glass panel (O) on the tabletop with the painted side facing down.

Footstool Assembly (×2)

Parts List:

• N: Stool Top ×2

• P: Long Side Panel ×4

• Q: Short Side Panel ×4

• E: L Legs ×8

• G: Seat Cushion ×2

Hardware:

• H: M6×40mm Bolt ×40

• I: M14mm Washer ×40

Steps:

1. Connect two short side panels (Q) to a long panel (P) using bolts and washers.

2. Attach the second long side panel (P).

3. Secure the stool top (N) to the assembled base.

4. Insert the four legs (E) into the base using bolts and washers.

5. Repeat for the second footstool.

Support

If any parts are missing or damaged, contact the retailer where the set was purchased for resolution.

Download the PDF Version