926 Rattan Cube Set – Assembly Guide

926 Rattan Cube Set – Assembly Guide

The 926 Rattan Cube Set is a versatile and space-saving outdoor furniture set designed with functionality in mind. It includes 4 chairs, 1 table, and 4 footstools, all of which fit compactly together when not in use. Follow this guide for safe and efficient assembly.

Important Pre-Assembly Tips

• Assemble on a flat, level surface like carpet.

• Check all parts and tools are present before starting.

• Keep all bolts loosely fastened until the frame is completely assembled, then tighten.

• Ensure the spray-painted side of the glass is facing downward.

• Do not jump on the furniture.

• Keep sharp objects and heat sources away from cushions, wicker, or glass.

• Use anti-rust treatment if corrosion appears.

• Store in a dry location during poor weather or prolonged periods of non-use.

• Keep small parts away from children.

Chair Assembly (×4)

Parts List:

• A-1: Right Side Panel ×4

• B-1: Left Side Panel ×4

• C-1: Back Panel ×4

• D-1: Seat Panel ×4

• E-1: Backrest Panel ×4

• F-1: Back Cushion ×4

• G-1: Seat Cushion ×4

Hardware:

• H: M6×40mm Bolt ×40

• I: M14mm Washer ×40

• J: M4 Allen Key ×1

Steps:

1. Attach side panels (A-1 & B-1) to the back panel (C-1) using bolts (H) and washers (I).

2. With the back panel (C-1) lying face down, insert seat panel (D-1) between the sides.

3. Stand the chair upright and attach the backrest panel (E-1).

4. Repeat for the remaining three chairs.

Table Assembly

Parts List:

• A-2: First Foot Panel ×1

• B-2: Second Foot Panel ×1

• C-2: Table Frame ×1

• D-2: Glass Panel ×1

Hardware:

• K: M6×15mm Bolt ×8

• I: M14mm Washer ×8

• J: M4 Allen Key ×1

Steps:

1. Turn table frame (C-2) upside down.

2. Attach first foot panel (A-2) to the table frame with bolts and washers.

3. Insert and secure second foot panel (B-2) to complete the frame.

4. Flip the table upright and insert glass panel (D-2) into the grooves.

Footstool Assembly (×4)

Parts List:

• A-3: Stool Top ×4

• B-3: Foot Panels ×8

• C-3: Side Panels ×8

• D-3: Seat Cushion ×4

Hardware:

• H: M6×40mm Bolt ×48

• I: M14mm Washer ×48

Steps:

1. Attach two side panels (C-3) to one foot panel (B-3) using bolts and washers.

2. Add the second foot panel (B-3) to complete the rectangular frame.

3. Turn the frame upside down and secure it to the underside of the stool top (A-3).

4. Repeat for the other three footstools.

Support

If you encounter any missing or damaged parts, contact the retailer from whom you purchased the product for assistance.

Download the PDF Version