934S Rattan Dining Table – Assembly Guide

934S Rattan Dining Table – Assembly Guide

The 934S Rattan Dining Table is a sleek and compact addition to any outdoor dining area. Designed for easy setup and long-lasting use, this table is packed in one carton and requires minimal tools to assemble. Follow the steps below for proper and safe assembly.

Important Pre-Assembly Tips

• Assemble on a level, even surface such as a carpet or mat.

• Confirm that all parts and hardware are included before beginning.

• Loosely fasten all bolts at first; fully tighten them once the structure is complete.

• Ensure the spray-painted side of the glass faces downward.

• Do not jump or apply heavy pressure on the table.

• Keep sharp or hot objects away from the glass and wicker material.

• Apply anti-rust treatment if any signs of corrosion appear.

• Store in a dry place during bad weather or prolonged non-use.

• Keep small components out of the reach of children.

Assembly Instructions

Parts List:

• A: Table Legs ×2

• B: Side Panels ×2

• C: Glass Panel ×1

• D: Table Top ×1

Hardware:

• F: M6×15mm Bolt ×4

• F-1: M6×40mm Bolt ×8

• G: M14mm Washer ×12

• H: M4 Allen Key ×1

Step-by-Step Assembly:

Step 1:

Insert the two table legs (A) into the table top (D) using M6×15mm bolts (F) and washers (G).

Step 2:

Attach the two side panels (B) to the legs using M6×40mm bolts (F-1) and washers (G).

Step 3:

Place the glass panel (C) flat on the table top with the painted side facing downward.

Once all parts are aligned and secure, fully tighten all bolts.

Support

For missing or damaged parts, please contact the retailer from whom the product was purchased.

Download the PDF Version