DENVER 4’6" Pine Bed Frame Assembly Guide

DENVER 4’6" Pine Bed Frame Assembly Guide

Congratulations on your new bed! Please follow these instructions carefully to ensure safe and proper assembly of your Denver 4’6" Pine Bed Frame.

Important Safety Information:

• Do not jump on the bed frame.

• Do not use the bed frame if any parts are missing, damaged, or worn.

• Do not use the bed frame unless all fixings are secured.

• Always assemble on a level, even surface.

• WARNING: If the bed is placed on a laminated floor, place protective pads under all legs to prevent movement and potential collapse.

Care & Maintenance:

• Periodically check and tighten all screws and fixings.

• Never push the bed frame—always lift with two people to reposition.

• Keep sharp objects away from the bed frame.

Assembly Steps:

Step 1:

• Assemble the headboard using foot parts (1) and (4) together with parts (5) and (7).

  • Use hardware part C with glue (I) on parts (5) and (7).

  • Fit feet (1) and (4) to parts (5) and (7), securing them with hardware parts G and E.

  • Once fixed, apply hardware part K on top of the screw.

• Assemble the footboard using foot parts (2) and (3) together with part (6).

  • Again, use hardware part C with glue (I) on part (6).

  • Fit feet (2) and (3) to part (6), and secure using hardware parts G and E on the screw tips.

Step 2:

• Attach a plinth (10) to the headend (5) using hardware part H.

  • Note: Do not use power tools; this may damage the frame and void any claim.

Step 3:

• Fix hardware part L to the headend (7) using hardware part F.

• Attach the side rails (8) using hardware parts A, C, and E.

  • Note: Do not use power tools.

Step 4:

• Secure the centre rail (9) using hardware part F.

  • Note: Do not use power tools.

Step 5:

• Position the slats (11) by applying pressure to both side rails (8).

• Secure them using hardware parts B and J with a screwdriver (not provided).

  • Note: Do not use power tools.

Once all parts are in place, fully tighten all fixings and ensure the bed frame is stable and secure.

Download PDF