VICTORIA 4'6" Bed Frame Assembly Guide

VICTORIA 4'6" Bed Frame Assembly Guide

Congratulations on your new bed! Follow these step-by-step instructions to assemble it safely and correctly.

Important Safety Information:

• Do not jump on the bed frame.

• Do not use the bed frame if any parts are missing, damaged, or worn.

• Do not use the bed unless all fixings are secure.

• Keep small parts out of reach of children.

• Always assemble on a level, even surface.

• WARNING: On non-carpeted floors, place protective pads under all legs to prevent movement and potential collapse.

Care & Maintenance:

• Assemble the bed in the room where it will be used.

• Periodically check and tighten all screws and fixings.

• Never push the bed frame; always lift with two people to reposition.

• Keep sharp objects away from the bed frame.

Parts List:

Assembly Steps:

Step 1:

• Attach the Side Rails (3) to the Headend (1) and Footend (2) using hardware parts A and the M5 Allen Key (I).

• Do not fully tighten the screws yet.

Step 2:

• Attach the Cross Bars (4) to the Side Rails (3) using hardware parts B, D, H, and J.

• Fully tighten the screws from Step 1.

Step 3:

• Attach the Support Legs (6) to the Centre Rail (5) using hardware parts C and H.

• Attach the Centre Rail (5) to the Cross Bars (4) using hardware parts B, D, H, and J.

Step 4:

• Slot the Slats (7) into the Double Slat Caps (E) and Single Slat Caps (F), then press them firmly into the Side Rails (3) and Centre Rail (5).

• Attach Finials (G) to the Headend (1) and Footend (2) to complete the assembly.

Once everything is in place, check and tighten all screws to ensure the bed frame is secure.

Need Help?

If you encounter any issues, contact the retailer where you purchased the bed for assistance.

Download PDF