GCB-1391 Bed Frame Assembly Guide

GCB-1391 Bed Frame Assembly Guide

Congratulations on your new bed! Please follow these instructions carefully to assemble it safely and correctly.

Before You Begin:

• The bed frame is packed in 3 cartons (KD style).

• Check all parts and tools listed on page 2 before starting.

• Assemble on a level, even surface.

• Avoid using power tools—they may damage the frame.

• Loosely secure all parts and bolts first; only fully tighten them once assembly is complete.

Safety and Care Advice:

• Always lift the bed with two people for repositioning.

• Keep small parts out of reach of children.

• Stop using the bed if any parts are missing, damaged, or worn.

• Periodically check and tighten all screws and fixings to ensure stability.

• Keep the frame away from direct sunlight.

• Clean with a cloth and mild detergent.

WARNING: On non-carpeted floors, use feet pads under all legs to prevent movement and potential collapse.

Parts and Hardware (Box 3):

Assembly Steps:

Step 1:

• Insert bolts C into the wooden legs, tighten clockwise, then secure the legs to the underside of the headboard and footboard by screwing counterclockwise. Repeat for both sides.

Step 2:

• Position the side rails next to the headboard and footboard, and secure them using corner brackets with bolts A.

Step 3:

• Fix the central support bar to the headboard and footboard using bolts A.

• Insert the support legs into the holes on the central support bar using bolts B, nuts D, and washers E.

Step 4:

• Slot the slats into the end slat caps and central slat caps as shown.

• Attach the slats to the side rails and central support bar, pressing them firmly into place.

• Once everything is properly positioned, fully tighten all bolts. Assembly is now complete!

Need Help?
If any parts are missing or damaged, please contact the retailer where you purchased the product for assistance.

Download PDF