LYON Daybed Assembly Guide

LYON Daybed Assembly Guide

Congratulations on your new Lyon Daybed! Please follow these instructions carefully for a safe and successful assembly.

Important Safety Information:

• Do not jump on the bed frame.

• Do not use if any parts are missing, damaged, or worn.

• Do not use the bed frame unless all fixings are properly secured.

• Keep small parts away from children.

• Always assemble the bed on a level, even surface.

• WARNING: If placing the bed on a non-carpeted floor, use protection under all legs to prevent movement and potential collapse.

Care & Maintenance:

• Assemble the bed frame in the room where it will be used.

• Periodically check and tighten all screws and fixings.

• Never push the bed frame—always lift with two people to reposition.

• Keep sharp objects away from the bed frame.

Parts List:

M4 Allen Key supplied.

Assembly Steps:

Step 1:

• Fix the Side Supports (3) to the Left Frame (1) and Right Frame (2) using hardware part (A).

• Do not fully tighten the screws yet.

Step 2:

• Attach the Back Rest (4) to the assembly using hardware part (A).

Step 3:

• Attach the Mid Support (5) using hardware parts (B) and (C).

Step 4:

• Place the Slat Caps (D) onto each Slat (6), then press them firmly into the Side Supports (3) and Back Rest (4).

• Finally, insert the Finials (E) to the Left Frame (1) and Right Frame (2).

Once you ensure everything is in place, fully tighten all screws. Your Lyon Daybed is now assembled and ready for use!

Need More Help?

• For complete product details, images, and dimension diagrams, visit www.birlea.com.

• If you have any issues, please contact the retailer where you purchased the bed for assistance.

• Want to share your setup? Email info@birlea.com to be featured in the #birleahome community on Instagram!

Download PDF