GCB-1301 Bed Frame Assembly Guide

GCB-1301 Bed Frame Assembly Guide

Congratulations on your new bed! Follow these steps for safe and easy assembly:

Before You Begin:

• The bed frame comes in 3 cartons (KD style).

• Check all parts and tools on page 2 before assembling.

• Assemble on a level, even surface.

• Avoid using power tools—they could damage the frame.

• Loosely secure bolts at first and tighten them fully only after all parts are in place.

Safety and Care Advice:

• Always lift the bed with two people.

• Keep small parts out of reach of children.

• Stop using the bed if any parts are missing, damaged, or worn.

• Periodically check and tighten all screws.

• Keep the bed away from direct sunlight.

• Clean with a soft cloth and mild detergent.

WARNING: If placing the bed on a non-carpeted floor, use feet pads under all legs to prevent movement and potential collapse.

Parts and Hardware (Box 2):

Assembly Steps:

1. Attach the central support bar to the headboard and footboard using bolts A.

2. Insert the support legs into the holes on the central support bar using bolts B, nuts D, and washers E.

3. Slot the slats into the end slat caps and central slat caps, then attach them to the side rails and central support bar. Press them firmly into place.

4. Once everything is positioned correctly, fully tighten all bolts. Assembly is complete!

Need Help?
If you have missing or damaged parts, please contact the retailer where you purchased the product for assistance.

Download PDF