GCB-705 Bed Frame: A Step-by-Step Guide

How to Assemble the GCB-705 Bed Frame: A Step-by-Step Guide

The GCB-705 bed frame is an elegant piece of furniture designed to enhance the aesthetics of your bedroom while offering sturdy support. This guide walks you through every step to ensure a smooth and safe assembly process.

Before You Begin

Before diving into the assembly process, take a moment to review these essential guidelines:

Check the Parts:
Unbox and lay out all components, using the provided hardware list as a checklist. Double-check that you have all the necessary parts before starting.

Choose the Right Surface:
Assemble the bed on a level, even surface to prevent warping or damage. Avoid placing delicate crystal components on hard floors — they can shatter if dropped.

Hand Tools Only:
Use only the included Allen key and spanner. Power tools are not recommended as they might strip threads or overtighten bolts, causing damage.

Safety First:

• Always lift the bed frame with two people.

• Keep small parts out of the reach of children.

• Periodically check all fixings to ensure the frame remains secure.

• Place felt pads under the legs if the bed is on a hard surface to prevent movement or damage.

Parts Overview

The GCB-705 comes with various components, including:

• Crystal screws, crystal balls, and holders

• Support tubes and support legs

• Crystal bases and finials

• Bedside panels (left and right)

• Headboard and footboard

• Long crossbars (A & B)

• Nuts, bolts, Allen key, and spanner

Assembly Instructions

Step 1: Assemble the Headboard and Footboard

• Insert the support tube into the crystal bases.

• Attach the bases to the end corners of the headboard using the crystal finials.

• Secure the crystal ball and holder to the headboard using the crystal screw.

• Repeat the same process for the footboard.

Note: Handle the headboard and footboard carefully to avoid shattering the crystal components.

Step 2: Assemble the Bedside Frames

• Attach the left and right bedside panels to the long crossbars (A and B) using bolts and the Allen key.

Step 3: Install the Central Supports

• Connect the central support bars and central support leg to the long crossbars using the provided bolts and Allen key.

• Attach the end support legs to the bedside panels using the bolts and nuts.

Step 4: Final Assembly

• Secure the assembled bedside frame to the headboard and footboard using bolts and the Allen key.

• Once all parts are correctly positioned, fully tighten all bolts.

Maintenance and Care

• Clean the bed frame with a damp cloth and mild detergent.

• Keep the frame away from direct sunlight to prevent fading or damage.

• Regularly check and tighten all fixings.

• Never use the bed frame if any part is missing, damaged, or worn.

Warnings

• This bed frame is intended for adult use only; it is not safe for babies, toddlers, or young children.

• If placed on a hard surface (e.g., wooden or tiled floors), always use felt pads under the legs to prevent the frame from moving or collapsing.

Download PDF: