GCB-704 Bed (4' / 4'6" / 5') – Assembly Guide

Created by Learning and Development, Modified on Wed, 4 Jun at 8:33 AM by Learning and Development

GCB-704 Bed (4' / 4'6" / 5') – Assembly Guide

The GCB-704 Bed is an elegant wooden frame bed featuring crystal finials and robust central support. It is suitable for adult use and is available in three sizes (4ft, 4ft 6in, and 5ft). Follow the steps below to assemble the frame securely and properly.


Important Pre-Assembly Tips

  • Assemble on a flat, level surface.

  • Do not use power tools; use only the tools provided.

  • Leave bolts loosely fastened until the entire frame is assembled, then tighten fully.

  • Always lift the bed frame with two people.

  • Place feet pads under the legs if on non-carpeted flooring to prevent shifting.

  • Not suitable for babies, toddlers, or young children.

  • Keep all small parts away from children.

  • Clean with a mild detergent and cloth.

  • Regularly check all fixings for safety.


Parts List

Main Components:

  • Headboard ×1

  • Footboard ×1

  • Bedside (Right) ×1

  • Bedside (Left) ×1

  • Long Cross Bar A ×4

  • Long Cross Bar B ×4

  • Central Support Bar ×2

  • Central Support Leg ×4

  • End Support Leg ×2

  • Crystal Finial ×4


Hardware List:

  • A: M6×12mm Bolt ×16

  • B: M6×45mm Bolt ×4

  • C: M6×52mm Bolt ×4

  • D: M8×20mm Bolt ×8

  • E: M6 Nut ×4

  • F: M4 Allen Key ×1

  • G: M6 Spanner ×1


Assembly Instructions

Step 1: Assemble the Side Frame

  • Connect the right and left bedsides to the long cross bars (A and B) using bolts (A) and the Allen key (F).

Step 2: Install Support Components

  • Attach the central support bars and central support legs using bolts (B and C).

  • Secure the end support legs to the frame using bolts (D) and nuts (E) with the help of the Allen key and spanner (G).

Step 3: Connect Headboard and Footboard

  • Attach the entire side frame assembly to the headboard and footboard.

  • Screw the crystal finials into the top corners of the headboard and footboard.

  • Ensure all parts are aligned and then fully tighten all bolts.


Support

For damaged or missing parts, please contact the retailer where the product was purchased.


Download the PDF Version

Attachments (1)

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article