EMILY 4'6" Bed Frame Assembly Guide

Created by Learning and Development, Modified on Wed, 11 Jun at 6:12 AM by Learning and Development

EMILY 4'6" Bed Frame Assembly Guide

Congratulations on your new bed! Please follow these step-by-step instructions to safely and effectively assemble your EMILY bed frame.


Important Safety Information:

  • Do not jump on the bed frame.

  • Do not use the bed if any parts are missing, damaged, or worn.

  • Do not use the bed unless all fixings are secured.

  • Keep small parts out of reach of children.

  • Always assemble the bed on a level, even surface.

  • WARNING: On non-carpeted floors, place protection under all legs to prevent movement and potential collapse.


Care & Maintenance:

  • Assemble in the room where it will be used.

  • Periodically check and tighten all screws and fixings.

  • Never push the bed frame to reposition it—always lift with two people to avoid damage.

  • Keep sharp objects away from the bed frame.


Parts List:

PartDescriptionQty
1Headend1
2Footend1
3Side Support2
4Side Frame2
5Mid Support2
6Base Leg1
7Slat22
EDouble Slat Cap11
FSingle Slat Cap22
GSlat Finial3
HM8 x 50mm JCBC Screw4
IM8 Nut2


HardwareDescriptionQty
AM6 x 16mm JCBC Screw8
BM6 x 50mm JCBC Screw4
CM6 Nut10
DM6 x 35mm JCBC Screw6


M4 & M5 Allen Keys provided


Assembly Steps:

Step 1:

  • Attach the Side Supports (3) to the Headend (1) and Footend (2) using hardware part (A). Do not fully tighten yet.

Step 2:

  • Place the Side Frames (4) underneath the Side Supports and secure with hardware parts (B) and (C).

Step 3:

  • Position the Mid Supports (5) on top of the Side Frames and secure using hardware parts (H) and (I).

Step 4:

  • Attach the Base Leg (6) to the Mid Support using hardware parts (C) and (D).

Step 5:

  • Push Double Slat Caps (E) into the Mid Support, then place Single Slat Caps (F) onto each Slat (7).

Step 6:

  • Slide the Slats (7) into the Double Slat Caps (E) on the Mid Support, then press the ends firmly into the Side Supports.

  • Insert hardware part (G) into the frame posts to complete the assembly.

Once all parts are positioned, fully tighten all bolts.


Additional Information:

  • For complete product details, images, and dimension diagrams, visit: www.birlea.com

  • If you have any issues, contact the retailer where you purchased the bed for assistance.

  • Share your assembled furniture photos with us! Email info@birlea.com to be featured in our #birleahome on Instagram.


Download PDF

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article