GCB-1361 4'6/5' BED Step-By-Step Guide

Bed Frame Assembly Guide

Congratulations on your new bed! Follow these steps carefully to assemble it properly and safely.

Before You Begin:

• The bed frame is packed in 4 cartons (KD style).

• Check all parts and tools listed on the second page before starting.

• Always assemble on a level, even surface.

• Do not use power tools—they could damage the frame.

• Loosely secure all bolts and parts first, then fully tighten them once the assembly is complete.

Safety and Care Advice:

• Always lift the bed with two people to reposition safely.

• Keep small parts away from children.

• Stop using the bed frame if any parts are missing, damaged, or worn.

• Periodically check and tighten all screws to ensure the bed frame remains secure.

• Keep the frame away from direct sunlight.

• Clean with a cloth and mild detergent.

WARNING: For non-carpeted floors, use feet pads under all legs to prevent movement and potential collapse.

Parts and Hardware (Box 3):

Assembly Steps:

Step 1: Attach the metal legs to the bottom of the headboard and footboard using bolts C.

Step 2: Position the side rails next to the headboard and footboard, then secure with corner brackets using bolts A.

Step 3: Fix the central support bar to the headboard and footboard using bolts A. Insert the support legs into the holes on the central support bar using bolts B, nuts D, and washers E.

Step 4: Place the planks vertically flat to the side rails.

Once all parts are positioned, fully tighten all bolts. Assembly is now complete!

Need Help?
If you have any issues or missing parts, please contact the retailer where you purchased the bed for assistance.

Download PDF