GCB-710 Bed: Step-by-Step Guide

How to Assemble the GCB-710 Bed: Step-by-Step Guide

Assembling your GCB-710 bed is straightforward if you follow the instructions carefully. Here’s a user-friendly guide to ensure your bed is safely and properly assembled.

Before You Start:

• Inventory Check: Confirm all parts and tools listed are present.

• Flat Surface: Assemble on a level, even surface to avoid misalignment.

• Avoid Power Tools: These may damage the frame.

• Secure Loosely First: Only fully tighten screws after completing assembly.

Safety and Care:

• Always lift the bed with two people to reposition it.

• Keep small parts away from children for safety.

• Do not use the bed if any parts are missing, damaged, or worn.

• Regularly check all screws and fittings to ensure stability.

• Keep the frame away from direct sunlight.

• Clean with a cloth and mild detergent.

• Warning: If using the bed on a non-carpeted floor, use feet pads under all legs to prevent sliding. Failure to do so may compromise the bed’s stability.

• Important: This bed is intended for adult use only — not for babies, toddlers, or young children.

What’s in the Box?

• Bed Components: Headboard, footboard, bedside panels (left and right), long cross bars (A & B), end support leg, central support leg, central support bar, and crystal finials.

• Hardware: M6x12mm bolts, M6x45mm bolts, M6x52mm bolts, M8x20mm bolts, M6 nuts, M4 Allen key, and M6 spanner.

Assembly Steps:

Step 1:

• Attach the bedside (right) and bedside (left) panels to the long cross bars (A & B) using bolts and the Allen key.

Step 2:

• Attach the central support bars and central support leg to the long cross bars A using bolts.

• Connect the end support leg to the bedside panels using bolts and nuts, with the help of the Allen key and spanner.

Step 3:

• Secure the assembled bedside frame to the headboard and footboard using bolts and the Allen key.

• Insert the crystal finials into the top corners of the headboard and footboard.

Final Steps:

• Ensure all parts are correctly aligned and positioned before fully tightening all bolts.

• Periodically check that all screws and bolts remain secure over time.

By following these steps, you’ll have a sturdy and attractive bed frame ready for use. Enjoy your new GCB-710 bed!

Download PDF